Material Stock / Shearing Department
Prototek® Manufacturing keeps a wide range of materials on hand to assist in providing the fastest delivery times in the industry. Below is a list of the materials we keep in stock:
- Cold Rolled Steel (0.036" - 0.250")
- Galvanized Steel (0.036" - 0.090")
- 2B Stainless Steel (0.030" - 0.134")
- #4 Stainless Steel (0.036" - 0.125")
- #8 Stainless Steel (0.036" - 0.125")
- 5052 Aluminum (0.020" - 0.250")
- 6061 Aluminum (0.062" - 0.250")
We also keep thousands of types and sizes of hardware in stock, organized using the proven kanban system.
10'- 1/4 Guifil Hydraulic Shear with Power Back Guage
6' Edwards Shear 1/4" Capacity
4' Wysong Shear 14 Guage Capacity
Shearing is quickly becoming a thing of the past with the advanced technology of our 4000 watt laser and LC-C1 that automatically cuts off any unused material after a part is finished being lasered and/or punched to be organized and saved for later use.
View Larger Map
Prototek at D2P in Marlborough, MA
Design2Part Photos from Chantilly, VA
Toxicity of TGIC in Powder Coats
Why and how to switch to non-TGIC powder coats. TGIC is classified under the Chemicals Regulation 2002 as toxic...
Dennis Interviewed at D2P
“Prototek basically specializes, like I said, in sheet metal. So these are some of the parts we have. As you can see, a lot of intricate...